新型低压抽屉式开关柜在冶金系统的应用

介绍新型低压抽屉式开关柜的结构性能和特点，并与早期低压柜作了比较。阐述了新型低压抽屉式开关柜在冶金系统应用中的几点改进情况。     

Optimal H∞ general distance problem with degree constraint

In this paper the optimal H_∞, general distance problem, for continuous-time systems, with a prescribed degree on the solution is studied. The approach is based on designing the Hankel singular values using an imbedding idea. The problem is first imbedded into another problem with desirable characteristics on the Hankel singular values, then the solution to the original problem is retracted via a compression. The result is applicable to both the one-block and the four-block problems. A special case is given for illustration.     

职业技能鉴定质量分析初探

职业技能鉴定是推行职业资格证书制度的重要环节,鉴定的质量直接关系到职业资格证书的真实性、权威性。通过对试卷的有效性和可靠性的分析,以及对试题难度、区分度的分析,对职业技能鉴定质量的分析方法进行了探讨,阐述了质量分析在职业技能鉴定中的作用。     

The treatment of waste-air containing mixed solvent using a biofilter 2. Treatment of waste-air containing ethanol and toluene in a biofilter

An experiment for five stages of a biofilter-run was performed to investigate the effect of hydrophilic ethanol and hydrophobic toluene on the biodegradation of hydrophobic toluene and hydrophilic ethanol, respectively, when waste-air containing toluene and ethanol was treated by a biofilter. Removal efficiencies of toluene and ethanol began to decrease when inlet load surpassed 90 g/m³/h and 100 g/m³/h consistent with maximum elimination capacities of toluene and ethanol, respectively. At the end of the biofilter-run, removal efficiencies for toluene and ethanol were decreased and maintained at 65% and 40%, respectively. The concentration of toluene at 1st sampling port was raised by factor of two in the 3rd stage of the biofilter run when the inlet load of ethanol co-feed was increased by 1.5 times, while the process conditions of toluene were maintained the same as those of the 2nd stage of biofilter-run. According to the result of Mohseni and Allen, it may be interpreted that removal efficiency of hydrophobic toluene was affected by the presence of hydrophilic ethanol when high load of hydrophobic toluene was applied like that of the 1st sampling port of the biofilter. However it was not the case when a low load of hydrophobic toluene was applied like those of the 2nd, 3rd and 4th sampling ports since hydrophobicity of toluene is much less that of α-pinene. Thus, it may be suggested that biodegradation of hydrophobic VOC was interfered by hydrophilic VOC dissolved in the biolayer and the degree of interference was proportional to the inlet load of hydrophobic VOC as well as that of hydrophilic VOC and was inversely proportional to the solubility of hydrophobic VOC. However, it was inferred that the existence of hydrophobic toluene from waste-air can hardly inversely hinder the removal of hydrophilic ethanol in the biofilter when timeevolutions of hydrophilic ethanol concentrations of this experiment were compared with those of the previous experiment of biofilter to treat waste-air containing ethanol only.     

Learning Organizations in Construction

The transformation of organizations from production-oriented entities to proactive learning entities that continuously leverage the knowledge of the workforce is a primary objective of management researchers. This focus has significant relevance to the construction industry where production-related research has predominantly overshadowed organizational development research. As one effort to change this emphasis, the writers present a research effort designed to study current organization learning techniques and technologies fielded by organizations both inside and outside of the construction industry. Through a series of exploratory case studies, the writers developed a maturity model together with the Construction Industry Institute that provides construction organizations with a framework for developing a learning organization culture. The maturity model focuses on learning organization characteristics of leadership, processes and infrastructure, communication/collaboration, education, and culture at the organization, community, and individual levels. This paper introduces the results of that effort including a presentation of the learning organization maturity model, framework application, and the overall characteristics of a learning organization.     

Bruce E. Wampold: Award for Distinguished Professional Contributions to Applied Research.

Presents the citation, biography, and selected bibliography for Bruce E. Wampold, the 2007 recipient of the American Psychological Association's Award for Distinguished Professional Contributions to Applied Research. Also presented is an article based on the author's award address delivered at the APA's 115th annual meeting, held August 17-20, 2007, in San Francisco, California. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Law,liability and expert systems

This paper examines some of the possible legal implications of the production, marketing and use of expert systems. The relevance of a legally useful definition of expert systems, comprising systems designed for use both by laymen and professionals, is related to the distinctions inherent in the legal doctrine underlying provision of goods and provision of services. The liability of the sellers and users of, and contributors to, expert systems are examined in terms of professional malpractice as well as product liability. A recurring theme indicates that legislators may be inclined to restrict possibilities of liability suits in order to avoid disincentives to the creation of expert systems.     

职业与执业中外建筑师之辨

职业建筑师制度是建筑生产方式的产物．建筑服务的内容和标准程序是各国职业建筑师体系的重要内容。通过对比我国与国际上通行的几个职业体系,文章提出我国建筑师职能的全程化、全面化、专业化和建筑制度的透明化、合理化的改革方向．以及建筑制度创新的必要性。     

Optimal control of accelerator concentration for resin transfer molding process

Resin cure following mold filling is an essential element in resin transfer molding. To fabricate a composite part with high dimensional stability and minimize residual stress, uniform resin cure should be achieved. This study considers a three-part resin system composed of epoxy, hardener and accelerator. The cure kinetics can be controlled by the accelerator concentration at the injection gate. A numerical method that can predict degree of cure distribution based on accelerator concentration at the gate was proposed. The degree of cure distribution is obtained by solving the resin flow, heat transfer, accelerator concentration and cure problems sequentially. Utilizing this numerical method, an optimal variation of accelerator concentration during mold filling was sought by solving a constrained optimization problem. The effect of accelerator control on degree of cure distribution was investigated and its validity was examined for two different geometries.     

The value of certification: an empirical assessment of the perceptions of end-users of local area networks

Abstract. Certification is one criterion that employers seek when hiring network professionals. Many employers assume a certified network professional is better able to manage networked resources than is a non-certified counterpart. Therefore, employers often offer a monetary premium to attract certified network professionals. By measuring end-user perceptions, the current study empirically assesses the popular industry assumption that certified network professionals are more adept managers of network resources than those individuals who are not certified network professionals. Analyses of a data derived from 299 end-users of 11 separate local area networks indicate no statistically significant difference exists between the capabilities of certified network professionals and non-certified network professionals.